Setting Up Your Printer; Unpacking The Printer - Konica Minolta Magicolor 3300 Installation Manual

Setting up Your Printer

WARNING!
Your printer weighs approximately 65 lbs (29.5 kg) without consumables
and accessories. Be sure to have help when lifting and moving it.
Shipment Contents
Printer (with 100-sheet multipurpose tray and 500-sheet upper media tray)
Consumables
a Imaging unit
b Four toner cartridges (already installed)
Power cord
Software Utilities and Documentation CD-ROMs
Quick Setup Guide
Installation Guide
Registration card (Americas only)
Interface cables aren't included in the shipment. If you need cables, contact
your local vendor or computer store.

Unpacking the Printer

We strongly suggest that you save the packaging materials in case
you ever need to move or ship the printer.
After removing the consumables from the printer carton, use the following
instructions to unpack your printer.
1
Remove the protective plastic cover.
WARNING!
Lift the printer only from the front and back. Lifting it from the sides may
cause it to tip over.
6
a
b
Setting up Your Printer