Advertisement
2
FIT AND SECURE
2.19
2.20
KSFR002_REV_A03
Clean the area around the holes in the
vehicle's roof using a rag and denatured
alcohol. Place some silicone around each
hole in the vehicle's roof.
Place the spacers as shown in Fig 1.1 in
the vehicle's ditch, aligning the cut outs in
the spacers with the holes in the vehicle's
roof.
Place some silicone in the cut outs of the
spacers as shown.
Refer to RRAC191 or RRAC230 before fully
tightening Item 2.
Place a bead of silicone along the threads
10mm
of the M6 x 50 Hex Bolts and secure the
rack using M6 x 50 Hex Bolts, M6 Spring
Washers, M6 x 19 x 1 Flat Washers, Dimple
Plates & Nut Plates (Items 2, 9, 10 & 11).
Have a friend help hold the Nut Plates in
position against the roof. Fully tighten.
Place M6 nut caps (Item 19) over all hex
bolts. .
6
13mm
© 2022 FRONT RUNNER VEHICLE OUTFITTERS
Advertisement
