QMS Magicolor 2 Desklaser User Manual page 225
Konica minolta magicolor 2 desklaser: user guide
Hide thumbs
Also See for Magicolor 2 Desklaser:
- Install manual (60 pages) ,
- Quick setup manual (4 pages) ,
- Supplementary manual (1 page)
Table of Contents
Advertisement
5
Replace the protective sheet around the OPC belt cartridge and the tension
release pin on each side.
Insert the pin until you feel some resistance, move it forward (toward the silver
corona unit), and then slide it in the rest of the way. The tension-release pins pro-
tect the belt and its cleaning blade by relieving tension during movement.
6
Repack the OPC belt cartridge in its original shipping bag.
If you don't have this bag, carefully wrap the cartridge in a piece of dark, heavy
cloth. Store the cartridge where it will not get scratched or damaged.
7
Rotate down the lock levers at each end of the OPC belt cartridge slot.
WARNING! The fuser unit can become extremely hot and cause severe burns. Make
sure the unit is cool before handling it.
ACHTUNG! Die Fixiereinheit kann sehr heiß werden, so daß Verbrennungsgefahr
besteht. Bitte lassen Sie die Fixiereinheit einige Zeit abkühlen, bevor Sie diese
berühren.
Advertisement
Table of Contents
