QMS Magicolor 2 Desklaser User Manual page 100

   
 Caution: Although the QMS magicolor 2 DeskLaser was designed for occasional
printing on a wide range of media types, it is not intended to print exclusively on a
single media type except plain paper. Continuous printing on media other than plain
paper (such as envelopes, glossy stock, labels, thick stock, transfer media, or
transparencies) may adversely affect print quality or reduce engine life.
 
After 200 1-sided pages (or 100 2-sided pages) of a continuous print run of plain
paper, the magicolor 2 DeskLaser automatically pauses for 3 minutes to cool down the
engine. This occurs for monochrome or color printing.
After this initial cooldown pause, the printer automatically resumes its printing. From
that point forward while doing continuous printing, the 3-minute cooldown pause
occurs every 50 pages until the continuous printing stops.
After an extended idle period, this 50-page interval automatically resets to 200 pages.
This process is provided to maintain the rated duty cycle of the printer and to ensure
reliable printer operation with optimum output quality.