Flight Management
5) Turn the FMS Knob to highlight 'Load Departure'.
6) Press the ENT Key to load the departure procedure into the active flight
plan.
LOADING A DEPARTURE PROCEDURE INTO A STORED FLIGHT PLAN
1) Select a stored flight plan from the 'FPL - Flight Plan Catalog' Page.
2) Press the Edit Softkey; or press the MENU Key, select 'Edit Flight Plan', and
press the ENT Key. The 'FPL - Stored Flight Plan' Page is displayed.
3) Press the LD DP Softkey; or press the MENU Key, select "Load Departure",
and press the ENT Key. The 'PROC - Departure Loading' Page is displayed.
4) Select a departure. Press the ENT Key.
5) Select a runway served by the selected departure, if required. Press the
ENT Key.
6) Select a transition for the selected departure. Press the ENT Key.
7) Press the ENT Key to load the selected departure procedure.
REMOVING A DEPARTURE PROCEDURE FROM THE ACTIVE FLIGHT PLAN
1) Press the FPL Key to display the 'FPL - Active Flight Plan' Page (MFD) or the
'Flight Plan' Window (PFD).
2) Press the MENU Key, and highlight 'Remove Departure'.
3) Press the ENT Key. A confirmation window is displayed listing the
departure procedure.
4) With 'OK' highlighted, press the ENT Key. To cancel the removal request,
highlight 'CANCEL' and press the ENT Key.
REMOVING A DEPARTURE FROM A STORED FLIGHT PLAN
1) Press the FPL Key to display the 'FPL - Active Flight Plan' Page.
2) Turn the small FMS Knob clockwise one click to display the 'FPL - Flight
Plan Catalog' Page.
3) Press the FMS Knob to activate the cursor and turn the FMS Knob to
highlight the flight plan to be edited.
4) Press the EDIT Softkey; or press the MENU Key, select 'Edit Flight Plan' and
press the ENT Key. The 'FPL - Stored Flight Plan' Page is displayed.
84
Garmin G1000 NXi Cockpit Reference Guide for the Cessna NAV III
190-02178-02 Rev. A