Nav/Com/Transponder/Audio Panel; Enter Or Change A Flight Id (Optional); Adf Tuning (Optional); Dme Tuning (Optional) - Garmin G1000 NXi Reference Manual

NAV/COM/TRANSPONDER/AUDIO PANEL

ENTER OR CHANGE A FLIGHT ID (OPTIONAL)

1) Press the TMR/REF Softkey, then turn the large FMS Knob to highlight the
Flight ID field.
2) Turn the small FMS Knob to enter the first character.
3) Turn the large FMS Knob to select the next field.
4) Turn the small FMS Knob to enter the next desired character.
5) Repeat steps 3 and 4 until the desired Flight ID is entered.
6) Press the ENT Key to update the Flight ID. Do not perform any other system
functions until 'updating' is no longer displayed.

ADF TUNING (OPTIONAL)

Tune the ADF using the remote ADF control head.

DME TUNING (OPTIONAL)

1) Press the DME Softkey.
2) Turn the large FMS to select the DME source field.
3) Turn the small FMS Knob to select the desired Nav radio.
4) Press the ENT Key to complete the selection.

SELECTING TRANSPONDER MODE

1) Press the XPDR Softkey to display the Transponder Mode Selection Softkeys.
2) Select the desired softkey to activate the transponder mode.
190-02178-02 Rev. A Garmin G1000 NXi Cockpit Reference Guide for the Cessna NAV III
Nav/Com/XPDR/Audio Panel
31