Kohler Vintage K-7158 Installation Manual page 3

7"
(17.8cm)
A
1-1/2"
O.D. 1-1/2" N.P.S.
Roughing-In
1-1/2" brass pop-up drain for 17" (43.2cm), 20" (50.8cm) and 24" (61cm)
baths.
A
K-7158 17-1/4" (43.8cm)
K-7159 17-1/4" (43.8cm)
K-7178 15-3/4" (40cm)
1. Install the Strainer
- Apply a ring of plumbers putty or other sealant to the underside of the
strainer according to the putty manufacturer's instructions.
- Place the gasket between the drain elbow and the bottom of the bath.
- Thread the strainer into the drain elbow. Do not fully tighten until after
the drain elbow and overflow tube have been installed.
Kohler Co.
Apply Plumbers
Putty
Strainer
Gasket
2-7/8"
(7.3cm)
Drain
3"
Elbow
(7.6cm)
3
Bath
A
1018153-2-