Table of Contents
Advertisement
Symptom
Media is mis-
feeding.
Solving Problems with Media Misfeeds
Cause
Envelopes are facing
the wrong way in Tray
1.
Transparencies have
collected static elec-
tricity in the tray.
Unsupported media
(wrong size, thick-
ness, type, etc.) is
being used.
The media feed roller
is dirty.
Solution
Load the envelopes in Tray 1 with the
flaps facing down.
If the flaps are on the long edge, load
the envelopes with the flap toward the
left of the machine with the flaps facing
down.
Remove the transparencies and load
them in Tray 1 one sheet at a time. Do
not fan transparencies before loading
them.
Use KONICA MINOLTA-approved
media.
See "Specifications" on page 40.
Also, refer to http://printer. konicami-
nolta.com for a complete list of cur-
rently approved media.
Clean the media feed roller.
For more details, refer to "Interior" on
page 145.
177
Advertisement
Table of Contents
