Westinghouse WSF6606XA User Manual page 7

CONTROL PANEL
containing the dishes to be washed
illuminates. The Half Load Indicator will
illuminate while this function is in
operation. Dishes placed in other areas
will not be washed.
12. Extra Hygiene Indicator
Select the Extra Hygiene function to
increase the wash temperature, for a
maximum hygiene washing operation.
The Extra Hygiene Indicator will
illuminate.
13. Extra Rinse Indicator
If Extra Rinse option is selected,
washing-rinsing steps will be added
into the selected program, so you can
ensure that your dishes will be
extracted cleaner and glosser.
14. Extra Drying Indicator
If Extra Drying option is selected, extra
heating and drying steps will be added
into the selected program, so you can
ensure that your dishes will be
extracted dryer.
15. Washing Step Indicators
The display will show the indicator
corresponding to the status of the
programme in operation. While the
Drying indicator is on, the machine will
remain silent with respect to the
programme you have selected for 15 to
100 minutes.
* Wash
* Rinse
* Dry
* End
NOTE: If you switch the machine to
off position after selecting the delay
time and the programme has started,
the delayed time is cancelled.
NOTE
To save any program as
:
favourite program, press program
selection (2) and delay (3) buttons at
the same time. To select favourite
program, press program selection
button (2) for 3 seconds.
Changing a programme
If you would like to change the
programme when the machine is already
running.
Press the Start/
Pause button.
After the programme stops,
select your desired
programme via the
programme selection button.
Start the newly selected
programmeby pressing the Start/
Pause button.
The new programme will
resume the course of the old
programme.
Cancelling a programme
If you would like to cancel a
programme when it is running.
Press the Start/Pause
button for 3 seconds.
During cancellation, the End light
blinks. The machine discharges
the water inside it in about 30
seconds.
When the End light turns
on, switch your machine
off by pressing the On/
Off button.
7
CONTROL PANEL