Table of Contents
Advertisement
4-4. Setup – DEVICE Mode
In the SETUP menu, select the DEVICE tab. Then, the device menu is displayed as pictured below.
Navigate through the menu items or change the settings using the mouse or the remote control.
Item
ALARM OUT
/ BEEP DURATION
DIGITAL DETERRENT
CONTROLLER & PTZ
SPOT-OUT
NONE: Disable recording during selected timeframe (Highlighted in White)
CONTINUOUS: CONTINUOUS recording (Highlighted in Green)
MOTION: MOTION recording (Highlighted in Yellow)
SENSOR: SENSOR recording (Highlighted in Red)
CLEAR: Clears the schedule
Figure 4.4. DEVICE Setup Screen
Table 4.4. Menu Items in DEVICE Setup Screen
Only one Alarm-out is available.
Set alarm dwell time from 5 to 60 seconds or infinite.
Setup schedule and audio recordings for Digital Deterrent.
Set the PTZ baud rate, protocol, and ID.
Display the channels triggered by an event (Refer to 4.4.3)
Description
37
Advertisement
Table of Contents
