Setup - Device Mode - Speco D8HT User Manual

4-4. Setup – DEVICE Mode
In the SETUP menu, select the DEVICE tab. Then, the device menu is displayed as pictured below.
Navigate through the menu items or change the settings using the mouse or the remote control.
Item
ALARM OUT
/ BEEP DURATION
DIGITAL
DETERRENT
CONTROLLER &
PTZ
SPOT-OUT
SITE
Figure 4.4. DEVICE Setup Screen
Table 4.4. Menu Items in DEVICE Setup Screen
Only one Alarm-out is available.
Set alarm dwell time from 5 to 60 seconds or infinite.
Setup schedule and audio recordings for Digital Deterrent.
Set the PTZ baud rate, protocol, and ID.
Display the channels triggered by an event (Refer to 4.4.4)
Select specified channel for motion zone setup.
Description
38