Denon DVD-2910/955 Operating Instructions Manual page 17

Hide thumbs Also See for DVD-2910/955:
Table of Contents

Advertisement

(8) DVI connections
Connection with equipment that has a DVI (Digital Visual Interface)-D connector permits the transfer of digital images.
When using display equipment that is not supported by the HDCP (content protection function), the image will not be output properly.
(See the compatibility table.)
Make an audio connection also because an audio signal will not be output from the DVI-D connector.
Commercially-available DVI cables are available in 24-pin and 29-pin types. The DVD-2910/955 supports the 24-pin DVI-D cable, but the
29-pin DVI cable cannot be connected.
DVD-2910/955
NOTE:
HDMI and DVI connectors.
• The table below indicates the compatibility of connections
between the HDMI/DVI-D output connector of the DVD-
2910/955 and monitors that support HDMI/DVI-D.
Monitor with
HDMI
HDMI output
terminal
Video/Audio*
1
DVI-D output
terminal
(Only Video)
Copyright Protection System
To play the digital images and sounds of DVD video or DVD audio via an HDMI/DVI-D connection, it is necessary that both the
player and monitor (or AV amplifier) support a copyright protection system called HDCP (High-bandwidth Digital Content
Protection System). HDCP is copy protection technology that comprises data encryption and authentication of the partner
equipment. The DVD-2910/955 supports HDCP. Please see the user's manual of your monitor (or AV amplifier) for information
about this.
Monitor with DVI-D
Monitor with DVI-D
(HDCP compatible)
(HDCP incompatible)
x
(Only Video)*
2
x
(Only Video)
DVI-D Input
connector
24P DVI-D cable
(commercially available)
Monitor equipped with
DVI-D input connectors
*1 Among the monitors that support HDMI, some do not support
audio output (for example, projectors). In connections with
equipment such as this, audio signals are not output from the
HDMI output connector. Use analog audio outputs connectors
to provide the audio output at "DIGITAL INTERFACE SETUP"
under "SETUP", set "HDMI AUDIO SETUP" to "2CH".
*2 When the set's HDMI connector is connected to a DVI-D
compatible monitor (HDCP compatible) with an HDMI-DVI
converter cable (commercially available), the signals are output
in digital RGB, regardless of the "HDMI/DVI SELECT" setting.
ENGLISH
17

Advertisement

Table of Contents
loading

Table of Contents