Fm Stereo (Auto)/Mono; Setting The Time And Date Format - Makita Outdoor Adventure ADRM06 Instruction Manual

3. Press and hold the Tuning control knob
out an auto-tune. Your radio will scan up the AM/FM
band from the currently displayed frequency and will
stop scanning automatically when it finds a station of
sufficient strength.
4. After a few seconds the display will update. The display
will show the frequency of the signal found.
5. To find other station, press and hold the Tuning control
knob as before.
6. When the end of the waveband is reached your radio
will recommence tuning from the opposite end of the
waveband.
7. Rotate the Tuning control knob
level as required.
Note:
● While adjusting the volume, make sure the FM/AM
is NOT flashing on the screen.
● If AM/FM is flashing on the screen, it allows you
to tune the stations manually (see the section of
"Manual tuning – AM/ FM" for more detail).
8. To switch off your radio press the Power button
Manual tuning – AM/FM
1. Press the Power button
2. Press the Source button
mode.
3. Press the Tuning control knob
FM or AM is flashing on the display.
Note:
● FM/AM will flash approx. 10 seconds. Within this
period, only manual tuning is allowed.
● If volume adjustment is desired while FM/AM is
flashing, press the Tuning control knob to stop the
flash and you can rotate the Tuning control knob to
adjust sound level.
4. Rotate the Tuning control knob
5. When the end of the waveband is reached your radio
will recommence tuning from the opposite end of the
waveband.
6. Use the Tuning control knob
level as required.
Presetting stations in AM/FM mode
There are 5 preset stations each for AM and FM radio.
They are used in the same way for each waveband.
1. Press the Power button
2. Press the Source button
waveband. Tune to the required radio station as
previously described.
3. Press and hold the required Preset button (1 to 5)
until the display shows "P4" for example
after the frequency. The station will be stored using the
preset number. Repeat this procedure for the remaining
presets as you wish.
to carry
to adjust the sound
to switch on your radio.
to select AM or FM radio
and you will see the
to tune to a station.
to adjust the sound
to switch on your radio.
to select the desired
10 ENGLISH
4. Preset stations which have already been stored may
be overwritten by following the above procedure if
required.
Display modes – FM
Your radio has a range of display options for FM radio
mode.
1. Repeatedly press the Menu/Info button
the RDS information of the station you are listening to.
a. Station name
b. Program type
c. Radio text
d. Year/Day
e. Date/Day
.
f. Frequency

FM stereo (auto)/mono

If the FM radio station being listened to has a weak signal
some hiss may be audible. It is possible to reduce this
hiss by forcing the radio to play the station in mono rather
than stereo.
1. Press the Power button
FM band and tune to the desired FM station as
previously stated.
2. Press and hold Menu/Info button
menu setting.
3. Rotate the Tuning control knob
mono setting shows on the display. If the setting is Auto
press the Tuning control knob to switch to Mono mode
to reduce the hiss. Press the Tuning control knob to
select the option.
Recalling a preset in AM/FM mode
1. Press the Power button
2. Press the Source button
mode.
3. Momentarily press the required Preset button
stations stored in the preset memory.

Setting the time and date format

The clock display used in stand-by mode and on the
playing mode screens can be set to different format. The
selected format is then also used when setting the alarms.
Displays the name if the station
being listened to.
Displays the type of station being
listened to such as Pop, Classic,
News, etc.
Displays radio text message such
as new items etc.
Displays the year and day of the
week according to the date
setting of your radio.
Displays the date and day of the
week according to the date
setting of your radio.
Displays the frequency of the FM
for the station listened to.
as needed to select the
until the FM Auto/
to switch on your radio.
to select AM or FM radio
to cause your radio to tune to one of the
to view
to enter the