Pioneer AVH-P7950DVD/RC Service Manual page 105

5
[Touched coordinate verification]
[Outline]
I The coordinate before correction and after correction at the time of pressing the touch panel are displayed for
coordinate verification.
Furthermore, the red "+" cursor can be moved by the key operaiont mentioned bellow, and the coordinate of
the cursor center is displayed.
16 "+" cursors in white are displayed at the location where a "+" cursor is displayed during the calibration inspection.
(Fixed display)
[Display specifications]
G Each displayed coordinate is as follows.
The values under [Factory] are the corrected values in the Factory region and the values under [User] are
the corrected values in the User region.
• Position
• Sampling
• AD Value
• Normalization
• Calibration
G Movable "+" cursor is displayed in red.
G 16 calibration points are displayed in white.
[Key operation specifications]
Operational description
To top menu
Cursor up movement
Cursor down movement
Cursor left movement
Cursor right movement
5
6
Movable by the cross key(in red)
: X/Y coordinate of the "+" cursor (movable) is displayed.
Movable range is (0, 0)~(799, 479).
: A/D value (X direction, Y direction) of the pressed point is displayed.
: The coordinate (X direction, Y direction) of the A/D value of the pressed point corrected by
the reference value for A/D correction is displayed.
: The coordinate (X direction, Y direction) after normalizing the A/D corrected coordinate
within the effective range is displayed. (0~255)
: The coordinate (X direction, Y direction) which is the result of adding the correction
by calibration to the normalized coordinate is displayed.
Main unit key Remote controller key
WIDE
BAND/ESC
ATT
PGM
DISP
AVH-P7950DVD/RC
6
7
Fixed display(in white)
MENU_ENTER
↓
↓
←
→
7
8
A
B
C
D
E
F
105
8