Panasonic PT-53WX54J Service Manual page 167

18.2. Fine adjustment mode (FINE) (convergence)
NOTE:
It is strongly recommended to first read and understand the following section prior to make any
adjustment. / Convergence adjustment must be perform for 480i-p (same for interlace & progressive),
ZOOM 480i and 1080i.
HELPFUL HINT:
The easiest way to adjust convergence is to start adjusting from the center of the screen to the
borders in all the convergence adjustments.
Once in "FINE" convergence mode press "4" on remote control frequently to change crossed
sections, this helps to check convergence more accurate in more sections of the picture. Please see
the following figuresthat show the cycle, this does not have any effect on the positions of the cursor.
"FINE" convergence mode default Grid
"FINE" convergence mode after pressing "4" on remote
"FINE" convergence mode after pressing "4" on remote
64