Panasonic PT-53WX54J Service Manual page 163

2. Press "2" repeatedly and apply the pattern of border and cross.
3. Press RECALL to display values
4. Adjust size so that the line of the border closes to the screen frame at
top, bottom, left and right, by pressing CH up-down and VOL right-left
"SIZE" mode adjustment
5. Press "7" then "ACTION" key on remote to save changes.
6. Enter to linearity "G-LINEAR" mode by pressing "TV/VIDEO".
7. Adjust linearity by pressing VOL right-left until A=B.
"LINEAR" mode adjustment
8. Press "7" then "ACTION" key on remote to save changes.
9. Enter to PIN "G-PIN" mode by pressing "TV/VIDEO"
10. Adjust V_PIN by pressing CH up-down (see figure)
11. Adjust H_PIN by pressing VOL right-left.
12. Press "7" then "ACTION" key on remote to save changes
60