Panasonic PT-53WX54J Service Manual page 161

12. Press "TV/VIDEO" key on remote to enter "OSD_POS" mode.
13. Press "5" key on remote so that monoscope pattern appears
(superimpose mode)
14. Move cursor by pressing VOL right - left and CH up - down so that
cursor center overlap monoscope pattern center
15. Press "0" key to go back to "CONVERGENCE ADJ" mode.
16. Press "TV/VIDEO" key to cycle through "COARSE ADJ. MODE"
options
17. To change to "FINE ADJUSTMENT MODE" options ("FINE" DAC),
press "TV/VIDEO" key on remote for at least 3 seconds, to go back to
"COARSE ADJ MODE" options press "TV/VIDEO" onremote again for 3
seconds.
18. In "FINE ADJUSTMENT MODE" options, press "MUTE" key on remote
to switch between "cursor" mode and "data" mode.
- Cursor mode: Allows cursor movement by pressing VOL right -
left and CH up - down.
- Data mode: Allows making adjustment by pressing VOL right - left
and CH up - down.
19. Either "COARSE ADJUSTMENT MODE" options or "FINE
ADJUSTMENT MODE" options, press "R-TUNE" repeatedly key on
remote to cycle through different color adjustments (R, G, B, White)
20. In "FINE ADJUSTMENT MODE" options, press "4" key on remote to
ADD crossed sections to pattern and make effect visible between
crossed sections.
21. To store adjustments press "7", then "ACTION" key on remote,
"COARSE" modes cycle
58