Using Memory; Using Delay End - Samsung WF7101SKS User Manual

washing a load of laundry

USING MEMORY

Press Memory button, select frequently used functions, press Start/Pause button to save the settings
automatically.
1. Press Power button.
2. Press Memory button.
: When you use this function for the first time - Press Memory button, select frequently used
functions (Wash+Rinse+Spin) and then press Start/Pause button to save the settings.
3. Put appropriate amount of detergent and softer depending on the amount of laundry, and
close the detergent drawer.
4. Press Start/Pause button.
Washing, Rinse, and Spin can't be separately selected
How to set up Memory Course
Select frequently used functions after pressing Memory button:
• Select items of interest such as Temperature, Wash, Rinse, Spin, and so on.
• Your selection can be saved only if you set up all steps as like Wash+Rinse+Spin.
• Turn the Select Course dial to select other courses.
• Turn power off and turn on again to cancel Memory Course.

USING DELAY END

You can set the washing machine to finish your wash automatically at a later time, choosing up to 24
hours maximum (in one hour increments). Displayed hours means the time of finished washing-cycle.
To do this:
1. Manually or automatically set your washing machine for the type of clothes you are washing.
2. Press the Delay End button repeatedly until the delay time is set.
3. Press the Start/Pause button. The Delay End indicator will light, and the clock will begin
counting down until it reaches your finish time.
4. To cancel "Delay End", press the Power button, then turn the washing machine on again.
16_ Washing a load of laundry
WF7101SKS-02502A-01_EN.indd 16 2007-11-14 ¿ÀÀü 11:37:50