Table of Contents
Advertisement
WOOL COURSE
(For laundries with wool washing
mark like sweaters, cardigans or
delicate clothes)
1. Put the laundry in the washer and press
the POWER button to on.
•
Be sure the weight of laundry is less than 2kg.
2. Select WOOL course button.
•
Select the adequate water level manually in case of light
laundry for the size
3. Press START/HOLD button.
Put the detergent/softener in proportion to the water level
and then close the lid.
•
Slightly dry the laundry at the last to avoid
wrinkles.
•
Cold water only be selected.
•
Use neutral detergent
•
Spinning into a side together or spinning the
washer board only prevent the damage on
the laundry.
SHIRT COURSE
(For shirts with dirt on the collar
or cuff)
1. Put the laundry in the washer and press the POWER
button to on.
2. Select SHIRT course button.
3. Press START/HOLD button.
Put the detergent/softener in proportion to the water level
and then close the lid.
•
Adjusted 20 minutes soaking to remove the heavy
dirt on the collar.
•
The washing board and tub spinning in the opposition
way, gives great efficiency washing
MEMORY COURSE
(Memorize the functions frequently
used, and you can use it easily when
washing the next time)
1. Put the laundry in the washer and press the
POWER button to on.
•
Check to put the functions you need before washing.
•
Refer to the following instruction on how to set up the
memory course.
2. Press MEMORY course button.
•
Selected functions are displayed on the control panel.
3. Press START/ HOLD button.
Put the detergent/softener in proportion to the water level
and then close the lid.
START/
WOOL
POWER
HOLD
START/
POWER
SHIRT
HOLD
START/
POWER
MEMORY
HOLD
How to set up memory course
1) Press the POWER button to on.
2) Press MEMORY button to on.
It is shown same as the beginning of Fuzzy course.
3) Select the functions frequently used manually
(such as water temperature, time of washing/spinning and
rinsing.)
4) Press the momory button one-second or more to input
selected mode (Press the button until buzzer makes
sound once more).
•
Press the START/HOLD button to run input mode.
•
Repeat the above proceduce to change the Memory
mode.
•
Even when power system turns OFF, your final input
mode is memorized.
CLEAN TUB COURSE
(in cleaning the washing tub)
1. Press the POWER button.
2. Press the CLEAN TUB button.
3. Press START/HOLD button.
Put the detergent in proportion to water level and
close the lid.
•
Soak washing adjusted.
•
Water temperature select button only adjustable.
•
Ideal detergent : powder bleach
•
Remove the dirt in the outer wall of the
washing tub with powerful stream of current.
DELAY START
1. Put the laundry in the washer
and press the POWER button to on.
•
Make sure to open the tab.
2. Press DELAY START course button.
1) Increase one hour more each press from 3 hours and
you can select by maximum 19 hours.
2) After selected time is over, it finishes washing.
•
You can choose a course separately as you want.
3. Press START/ HOLD button.
Put the detergent in proportion to water level and close
the lid.
•
Be sure of putting the detergent into the liquid soap
device.
•
In case of putting the detergent into the laundry directly,
it may be discolored according as the reservation is
longer.
•
Press the power button in order to cancel the
reservation.
•
It could be finished at slightly different time due to the
water pressure.
6
START/
CLEAN
POWER
HOLD
TUB
START/
DELAY
POWER
HOLD
START
Advertisement
Table of Contents
