Kodak EasyShare Printer Dock Plus Series 3 User Manual page 56

Troubleshooting
Problem
Printer is jammed
(Paper and/or
cartridge lights may
blink quickly)
49
Cause and/or solution
IMPORTANT:
Use only Kodak color cartridge & paper kits for your printer
dock. Do not use inkjet paper.
■
If the Paper light is blinking quickly:
1
Remove the paper tray
2
Disconnect the power from the printer dock for 5 seconds, then
reconnect the power.
Carefully remove the paper if it does not automatically eject.
IMPORTANT:
Check the paper slot on the back of the printer dock for
jammed paper:
3
Remove the paper supply from the paper tray. Carefully "fan" the
paper to keep the sheets from sticking together.
4
Reload the paper tray. Do not exceed the fill line.
5
Re-install the paper tray, then press
■
If the Color Cartridge light is blinking quickly, check the color
cartridge:
IMPORTANT:
The color cartridge may lock in place if there is a paper
error. Do not attempt to remove the cartridge without first
clearing the paper error. Make sure the Paper light is off
before attempting to remove the cartridge (see Paper light
under
Remove the color cartridge, remove any slack from the ribbon, then
re-install the cartridge
(page 7).
Status lights, page 58).
(page 4). Press
www.kodak.com/go/support
to resume printing.
to resume printing.