Kodak EasyShare Printer Dock Plus Series 3 User Manual page 67

Battery charging lights
Light status
All lights are off
One steady green light The camera was just placed in
Ascending steady
green lights
One blinking red light The battery is not properly
Descending blinking
green lights
www.kodak.com/go/support
Cause
The camera is not properly seated
on connector.
The camera is turned on.
An unrecognized battery type is
installed, or camera does not
support charging.
camera dock.
The battery is charging. Charging
is complete when all three lights
are lit.
installed.
The battery or connector pin is
damaged.
The camera and battery have been
exposed to extreme temperatures.
The Ni-MH rechargeable battery
refresh cycle is in progress:
discharging (lights turn off as
discharging progresses).
Troubleshooting
Action/solution
Reseat the camera on the printer
dock (page 8).
Turn off the camera.
Install a Kodak Ni-MH
rechargeable digital camera
battery or Kodak Li-Ion
rechargeable digital camera
battery. See your camera user's
guide for battery compatibility and
other charging options.
None; dock is checking the charge
status of the battery.
Leave the camera on the dock to
continue charging or maintain
charge.
Re-install the battery.
Check for damage.
Slowly return the camera and
battery to room temperature.
Leave the camera on the dock to
continue refresh cycle (page 9).
60