Kodak EasyShare Printer Dock Plus Series 3 User Manual page 71

Print button/light
Light status
Light glows steady
green
Light blinks green
Light is off
www.kodak.com/go/support
Cause
The printer dock is ready for
printing.
The printer dock is printing.
There are no pictures in the
camera or on the memory card.
The camera is not docked or a
compatible Kodak card reader is
not connected.
The camera is not properly seated
on the connector.
The camera or card reader is
transferring pictures to the
computer, or has established an
active connection to the
computer.
A PictBridge compatible camera
or device is connected.
Troubleshooting
Action/solution
None required.
None required.
To enable Print:
1
Take pictures.
2
Dock the camera or connect a
compatible Kodak card reader
(page 14). If using a card
reader, make sure a memory
card is inserted.
Reseat the camera on the printer
dock (page 8).
None required.
When transfer is complete, press
the blinking Transfer button,
None required.
The Print button is disabled; print
command is controlled from the
PictBridge compatible camera or
device. To print from another
source, unplug the PictBridge
compatible camera or device.
.
64