Advertisement
Reduce red eye in your prints
Your printer dock automatically detects and corrects red eye in your subjects before you print your pictures.
• Your printer dock defaults to red-eye reduction being always on, and the red-eye reduction button/light
glows green.
• The Red-eye reduction button is disabled when printing from a computer. If printing from a
computer (see page 10), make sure Kodak EasyShare software is installed on the computer.
• Your printer dock may apply red-eye reduction to an area such as a sunburn, which darkens
the area in your print. Turn off red-eye reduction.
• To turn red-eye reduction off, press the Red-eye-reduction button.
• To change the red-eye reduction default to off, press and hold the Red-eye-reduction button
for 5 seconds.
The Red-eye reduction light blinks, then turns off.
www.kodak.com/go/g600support
Red-eye reduction button/light
15
Advertisement
