Supermicro SuperServer 6019P-WT8 User Manual page 29

SuperServer 6019P-WT8 User's Manual
With 1 CPU
1 CPU & 1 DIMM
1 CPU & 2 DIMMs
1 CPU & 3 DIMMs
1 CPU & 4 DIMMs
1 CPU & 5 DIMMs
(Unbalanced: not
recomended)
1 CPU & 6 DIMM
With 2 CPUs
2 CPUs & 2 DIMMs
2 CPUs & 4 DIMMs
2 CPUs & 6 DIMMs
2 CPUs & 8 DIMMs
2 CPUs & 10 DIMMs
2 CPUs & 12 DIMMs
Operating Mode P1/P2-DIMMF1
AD DCPMM
MM DCPMM
AD + MM DCPMM
DRAM1
DRAM2
DRAM3
Notes: DDR4 single rank x8 is not available for DCPMM Memory Mode or App Direct Mode.
CPU1 and CPU2 should be populated identically.
AD: App Direct, MM: Memory Mode
DCPMM
•
For MM, the general NM/FM ratio is between 1:4 and 1:16. Excessive capacity for FM can be used for AD. (NM = Near
Memory; FM = Far Memory)
•
For each individual population, rearrangements between channels are allowed as long as the resulting population is compliant
with the PDG rules for the 82xx/62xx/52xx platform.
•
For each individual population, please use the same DDR4 DIMM in all slots as specified by the PDG rules.
•
For each individual population, sockets are normally symmetric with exceptions for 1 DCPMM per socket and 1 DCPMM
per node case. Currently, DCPMM modules operate at 2666 MHz.
•
No mixing of DCPMM and NVMDIMMs within the same platform is allowed.
•
This DCPMM population guide targets a balanced DCPMM-to-DRAM-cache ratio in MM and MM + AD modes.
Memory Population Table
Memory Population Sequence
CPU1: P1-DIMMA1
CPU1: P1-DIMMA1/P1-DIMMD1
CPU1: P1-DIMMC1/P1-DIMMB1/P1-DIMMA1
CPU1: P1-DIMMB1/P1-DIMMA1/P1-DIMMD1/P1-DIMME1
CPU1: P1-DIMMC1/P1-DIMMB1/P1-DIMMA1/P1-DIMMD1/P1-DIMME1
CPU1: P1-DIMMC1/P1-DIMMB1/P1-DIMMA1/P1-DIMMD1/P1-DIMME1/P1-DIMMF1
Memory Population Sequence
CPU1: P1-DIMMA1
CPU2: P2-DIMMA1
CPU1: P1-DIMMA1/P1-DIMMD1
CPU2: P2-DIMMA1/P2-DIMMD1
CPU1: P1-DIMMC1/P1-DIMMB1/P1-DIMMA1
CPU2: P2-DIMMC1/P2-DIMMB1/P2-DIMMA1
CPU1: P1-DIMMB1/P1-DIMMA1/P1-DIMMD1/P1-DIMME1
CPU2: P2-DIMMB1/P2-DIMMA1/P2-DIMMD1/P2-DIMME1
CPU1: P1-DIMMC1/P1-DIMMB1/P1-DIMMA1/P1-DIMMD1/P1-DIMME1/P1-DIMMF1
CPU2: P2-DIMMB1/P2-DIMMA1/P2-DIMMD1/P2-DIMME1
CPU1: P1-DIMMC1/P1-DIMMB1/P1-DIMMA1/P1-DIMMD1/P1-DIMME1/P1-DIMMF1
CPU2: P2-DIMMC1/P2-DIMMB1/P2-DIMMA1/P2-DIMMD1/P2-DIMME1/P2-DIMMF1
Symmetric Memory Population with DCPMM
P1/P2-DIMME1 P1/P2-DIMMD1
DRAM1 DRAM1
DRAM1 DRAM1
DRAM3 DRAM3
DDR4 Type
RDIMM 3DS RDIMM LRDIMM
RDIMM -
RDIMM 3DS RDIMM LRDIMM
Capacity
Any Capacity (Uniformly for all channels for a given configuration)
29
P1/P2-DIMMA1 P1/P2-DIMMB1
DRAM1 DRAM1
DRAM1 DRAM1
DRAM3 DRAM3
Capacity
3DS LRDIMM Any Capacity
- 16 GB or 32 GB
- Any Capacity
Channel
P1/P2-DIMMC1
Config.
DCPMM 1-1-1
DCPMM 1-1-1
DCPMM 1-1-1