Dell SP190SFP User Manual page 4

Monitor Specifications
Power Management Modes
If you have VESA's DPM™ compliance display card or software installed in your PC, the monitor automatically reduces its power consumption when not in use.
This is referred to as Power Save Mode. The monitor automatically resumes functioning when the computer detects input from the keyboard, mouse, or other
input devices. The following table shows the power consumption and signaling of this automatic power saving feature:
VESA Modes
Normal operation (with Dell Soundbar and USB active) Active
Normal operation
Active-off mode
Switch off
NOTE: The OSD only functions in the normal operation mode. One of the following messages appears when the "menu" or "plus" buttons are pressed when in
Active-off mode.
This monitor is ENERGY STAR®-compliant as well as TCO '99 / TCO '03 power management compatible.
* Zero power consumption in OFF mode can only be achieved by disconnecting the main cable from the monitor.
Pin Assignments
15-pin D-Sub connector
The following table shows pin assignments in the D-Sub connector:
Pin Number Monitor Side of the 15-pin Side Signal Cable
1 Video-Red
2 Video-Green
3 Video-Blue
4 GND
5 Self-Test
6 GND-R
7 GND-G
8 GND-B
9 DDC +5V
10 GND
Great user manuals database on
Left side
Horizontal Sync Vertical Sync Video
Active
Inactive
1. Auto Detect (Analog Input)
In Power Save Mode
Press Computer Power Button
or Any Key on Keyboard or Move Mouse
2. Analog Input
In Power Save Mode
Press Computer Power Button
or Any Key on Keyboard or Move Mouse
Activate the computer and the monitor to gain access to the OSD.
UserManuals.info
Right side
Power Indicator Power Consumption
Active Active Green
Active Active Green
Inactive Blanked Amber
- - - Off
1. Auto Detect (Digital Input)
or
Press Computer Power Button
or Any Key on Keyboard or Move Mouse
or
Press Computer Power Button
or Any Key on Keyboard or Move Mouse
75 W (maximum)
35 W (typical)
Less than 2 W
Less than 1 W
In Power Save Mode
3. Digital Input
In Power Save Mode