Using The Front Panel - Dell SP190SFP User Manual

Using the Front Panel

Use the buttons on the front of the monitor to adjust the image settings.
The following table describes the front panel buttons:
Video input select
OSD menu / select
Down (-) and Up (+)
Brightness Menu
Auto Adjust
Great user manuals database on
Use the Input Select button to choose between two different video signals that may be connected to your monitor.
If both VGA and DVI cables are connected to one PC, the monitor displays an image automatically as long as a video
signal is present in either the VGA or DVI outputs. When connecting one display to two PCs, if using screen savers,
best to set both to the exact times. Whichever mouse is moved first will activate that video input first.
NOTE: The floating 'Dell Self-test Feature Check' dialog appears on a black background if the monitor cannot
sense a video signal. Using the input select button, select the desired input to be tested either Analog Input
or Digital Input. Disconnect the video cable from the video card and the Dell Self-test Feature Check dialogue
box will appear if the display is operating correctly.
The Menu button is used to open and exit the on-screen display (OSD), and exit from menus and sub-menus. See
Using the OSD Menu.
Use these buttons to adjust (decrease/increase ranges) items in the OSD menu.
Use this button to launch Brightness menu.
Use this button to activate automatic setup and adjustment. The following dialog appears on a black screen as the
monitor self-adjusts to the current input:
Auto Adjustment button allows the monitor to self-adjust to the incoming video signal. After using Auto
Adjustment, you can further tune your monitor by using the Pixel Clock (Coarse), Phase (Fine) controls in the OSD.
UserManuals.info
or
or
Auto Adjust In Progress