NTI Trinity TX Series Installation And Operation Manual page 17

Tx I&O Manual
Table 4-5 Optional Vent Termination Kits
Description
IPEX Low Profile
7
(Wall)
IPEX Concentric
4,5,6,7
(Wall/Roof)
PolyPro® Concentric
(Wall)
PolyPro® Concentric
(Roof)
InnoFlue® Flush Mount
(Wall)
InnoFlue® Concentric
(Wall)
InnoFlue® Concentric
(Roof)
Z-DENS® Concentric
(Wall)
Z-DENS® Concentric
(Roof)
Notes:
1
Instructions included with termination kits contain detailed assembly and installation instructions.
2
Clearance requirements in this manual supersede those of the instructions included with the vent terminal.
3
Piping MUST be secured to the vent terminal during installation.
4
IPEX Concentric Terminal MUST be cemented together and to the vent pipes during installation.
5
Vent Screens provided with boiler may be used with the IPEX Concentric Vent Kits; otherwise use IPEX vent screens (2
in. vent screen p/n 196050; 3 in. vent screen p/n 196051 – each sold separately).
6
IPEX Low Profile and Concentric kits (excluding p/n 197117) are constructed out of ULC S636 approved PVC; check
with your local authority for the acceptance of PVC as a venting material prior to use.
7
IPEX Concentric kits can be shortened to fit the requirements of the installation; see instructions included with the kit for
more details.
PVC In Canada - Authorities in some jurisdictions may not allow the use of any PVC
venting materials with condensing boilers; check with the local safety inspector to verify
compliance prior to installing a PVC Concentric Vent Kit with a Trinity Tx.
Vent
Supplier p/n
Size
2"
196984
3"
196985 (NTI p/n 84357)
2"
196125
196116 (NTI p/n 82666)
3"
197117
2-3" 2PPS-HK, 3PPS-HK
2-3"
2PPS-VK, 3PPS-VK
2-3"
ISLPT0202, ISLPT0303
(ICWT242 & ICTC0224),
2-3"
(ICWT352 & ICTC0335)
(ICRT2439 & ICTC0224),
2-3"
(ICRT3539 & ICTC0335)
2-3" 2ZDHK2, 2ZDHK3
2-3"
2ZDVK2, 2ZDVK3
Vent Material
Figure
Compatibility
4-4(b), 4-6(c)
PVC/CPVC
4-4(c), 4-5(c),
4-6(b), 4-7(b)
4-4(c), 4-6(d)
PolyPro®
Polypropylene
4-5(c), 4-7(c)
4-4(b), 4-6(c)
InnoFlue®
4-4(c), 4-6(d)
Polypropylene
4-5(c), 4-7(c)
4-4(c), 4-6(d)
Z-DENS®
Polypropylene
4-5(c), 4-7(c)
│General Venting
Vent Option
Roof Wall
 
7
 
 


 








17