ClearSounds PHONE A1600 Operating Manual page 65

Storing M1-M4 Memory Numbers
1. Press the memory key (M1-M4) in standby mode.
2. The display shows "Number ?" Enter the desired number
(up to 24 digits) and you can press
Erase to erase digit(s). Then press
3. Press up
through
the word Select.
4. Repeat if necessary.
Note: These will appear as the first four entries in your
phonebook.
Viewing, Editing or Deleting M1-M4 Memory Numbers
You can view, edit, and delete the M1-M4 memory dial
number(s) by following the instructions in Using the
Phonebook Options, found on page 73. The memory default
names are M1:, M2:, M3:, M4:, and you can add a name after
the M1:- M4:, but you can't delete the default name.
Dialing from M1-M4 Memory Numbers
In standby mode, press one of the memory keys (M1-M4), the
display will show the corresponding number and begin to dial.
If you selected the wrong memory dial, press
Note: If you turn the Key Lock feature on, the M1 – M4 keys
will still be operational (see page 75 for more details).
Mute Setting
█
During a conversation, you can temporarily switch your phone's
microphone off to have a private, off-line conversation by using
the MUTE feature. The party on the phone cannot hear you but
you can hear them. A conversation can be muted while using
the handset, speakerphone or hands-free headset feature.
To mute your call any time during the conversation:
1. Press
appears on the handset LCD.
2. Press
cancel and return to your phone conversation.
or down
Melody 10
under the word Mute on the screen once. "Muted"
under the word Unmute on the screen again to
to select from Melody 1
and then
65 – ENGLISH
under the word
under the word Save.
press
to hang up.
under