Phone Installation - ClearSounds PHONE A1600 Operating Manual

PARTS CHECKLIST
█
Check the contents of the box - The A16000 should contain:

PHONE INSTALLATION

█
The phone should be located in an area where it is easy to
see the visual display and lighted ringer. Choose an area
near a phone wall jack (RJ11C) and power outlet. To avoid
potential interference, the phone should not be located near
electronic equipment, such as personal computers, television
or microwave ovens.
Begin by removing the clear plastic Caller ID protective
tab from the handset and the base. This film tab is
only for display and to protect your Caller ID displays
during shipping.
Connecting Lines
1. Connect one end of the 6 ft phone
cord to the line jack on the back of
the base and connect the other end
to a modular phone jack.
2. Plug the AC power adapter into the
jack on the back of the base, then
plug the AC adapter into a standard
electrical outlet or surge protector.
Note: The adapter is required for the phone to work.
1. Phone base
2. Cordless Handset
3. Batteries
4. Phone Line Cords
5. AC Adapter
6. Carrying Clip
7. User Manual
1
4
7
18 – ENGLISH
2
5
to AC outlet / to phone jack
3
6