Registering The Handset - ClearSounds PHONE A1600 Operating Manual

HANDSET SET UP
Reminder: Press
any menu to return to the previous screen. To return to the
main screen, press
phone will automatically return to the main screen from any
menu if no key is pressed.

Registering the Handset

█
The supplied handset is already registered to the base unit,
and you can register up to 4 additional handsets to the base.
1. Before registering an additional handset to the base, you
should press and hold the page key
the main base until you hear a loud tone and then release it.
2. Press
handset you are registering to display the main menu list.
3. Press up
then press
4. Press up
select one of the bases and then press
Select. The handset will search for the requested base.
5. If the base is found, and the handset is successfully
registered, you will be prompted to enter the PIN code
(the default PIN is 0000). Upon validation of the PIN, the
Registration tone will sound and the base assigns a number
to the handset. If the PIN entered is invalid, a warning
tone will sound and the handset will return to the previous
registration state.
6. If the base is not found, the handset will behave according
to the Out of Range description found on page 52.
Note: Remove Handset 1 from the main base while
registering additional handsets.
under the word Back on the screen from
. Otherwise, after 30 seconds, the
under the word Menu on the screen of the
or down
under the word Select.
or down
to scroll to Registration and
to scroll through the base list and
49 – ENGLISH
, which is located on
under the word