Handset Reset - ClearSounds PHONE A1600 Operating Manual

Note: If you selected the current handset or a non-registered
handset, a warning tone will be heard.
Base Selection
█
This function allows you to select a base from those already
registered to the handset. To select a base:
1. Press
the main menu list.
2. Press up
press
3. Press up
then press
4. Press up
then press
non-existent base, the handset will sound a warning tone.
5. The display
Selected. The display will automatically return to the
previous menu screen.

Handset Reset

█
This function allows you to reset the handset settings for
Alarm, Audio Setup, Ring Setup, Tone Setup, Language, HS
Name, Auto Answer and Date & Time to the initial factory
settings. To reset the handset:
1. Press
the main menu list.
2. Press up
under the word Select. You will be prompted to enter
the PIN.
3. Enter the PIN (the default PIN is 0000) and then press
under the word Select. If the PIN is validated, the display
will show Confirm?.
4. Press under the word Select to confirm or press
the word Back to cancel and exit.
If successful, the handset settings will be reset to the initial
factory settings, otherwise the settings will remain. After
resetting, the handset will return to standby mode.
under the word Menu on the screen to display
or down
under the word Select.
or down
under the word Select.
or down
under the word Select. If you select a
will show
under the word Menu on the screen to display
or down
to scroll to HS Settings and then
to scroll to Selected Base and
to select the base you want and
Searching
to scroll to Default and then press
51 – ENGLISH
and then
under
BS