Table of Contents
Advertisement
Web User Interface
Encryption:
Key Type:
Key Size:
Key Index (1-4):
Key:
WPA Mode:
Cipher Type:
Group Key Update Interval:
Pass Phrase:
Confirm Pass Phrase:
RADIUS Server:
RADIUS Port:
RADIUS Secret:
When you select Open System, toggle between Enable and Disable. If Enable is selected, the Key Type, Key Size, Key Index
(1~4), Key, and Confirm Keys must also be configured.
Select HEX or ASCII.
Select 64-bit or 128-bit.
Select from the 1st to 4th key to be set as the active key.
Input up to four keys for encryption. You will select one of these keys in the Key Index drop-down menu.
When you select either WPA-Personal or WPA-Enterprise, you must also choose a WPA mode from the drop-down menu: AUTO
(WPA or WPA2), WPA2 Only, WPA Only, WPA2 or WPA3, or WPA3 only. WPA, WPA2 and WPA3 use different algorithms. AUTO
(WPA or WPA2) allows you to use both WPA and WPA2, and WPA2 or WPA3 allows you to use both of WPA2 and WPA3.
Select Auto, AES, or TKIP from the drop-down menu.
Select the interval during which the group key will be valid. The default value of 1800 seconds is recommended.
When you select WPA-Personal, please enter a Pass Phrase in the corresponding field.
When you select WPA-Personal, please re-enter the Pass Phrase entered in the previous item in the corresponding field.
When you select WPA-Enterprise, enter the IP address of the RADIUS server. In addition, you must configure RADIUS Port and
RADIUS Secret.
Enter the RADIUS port.
Enter the RADIUS secret.
36
Advertisement
Table of Contents
