Chapter 2 Hardware Setup; Introduction To Jumpers - CHAINTECH 6VIA5 User Manual

Be sure to disconnect the power cable from the power source before performing
any work on your mainboard, i. e. installing a CPU, memory module,
changing a jumper setting, etc. Not doing so may result in electrical shock!

2-1 Introduction to Jumpers

Putting jumper caps on anything that is not a jumper may result in damaging
your mainboard. Please refer to Section 1-3, Mainboard Layout, for the
location of jumpers on your mainboard.
Chapter 2 Chapter 2
Chapter 2 Chapter 2 Chapter 2
Har Har d d d d d ware Setup Har ware Setup ware Setup
Har Har ware Setup ware Setup
Figure 2-1
Hardware Setup
7