Wen 20653 Instruction Manual
  1. Manuals
  2. Brands
  3. Wen Manuals
  4. Planer
  5. 20653
  6. Instruction manual
Wen 20653 Instruction Manual

Wen 20653 Instruction Manual

20v brushless planer
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
MODEL 20653
20V BRUSHLESS
PLANER
Instruction Manual
NEED HELP? CONTACT US!
Have product questions? Need technical support? Please feel free to contact us:
1-800-232-1195 (M-F 8AM-5PM CST)
TECHSUPPORT@WENPRODUCTS.COM
IMPORTANT: Your new tool has been engineered and manufactured to WEN's highest standards for dependability,
ease of operation, and operator safety. When properly cared for, this product will supply you years of rugged,
trouble-free performance. Pay close attention to the rules for safe operation, warnings, and cautions. If you use
your tool properly and for its intended purpose, you will enjoy years of safe, reliable service.
WENPRODUCTS.COM
For replacement parts and the most up-to-date instruction manuals, visit

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 20653 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Wen 20653

Summary of Contents for Wen 20653

  • Page 1 1-800-232-1195 (M-F 8AM-5PM CST) TECHSUPPORT@WENPRODUCTS.COM IMPORTANT: Your new tool has been engineered and manufactured to WEN’s highest standards for dependability, ease of operation, and operator safety. When properly cared for, this product will supply you years of rugged, trouble-free performance. Pay close attention to the rules for safe operation, warnings, and cautions. If you use your tool properly and for its intended purpose, you will enjoy years of safe, reliable service.

  • Page 2: Table Of Contents

    CONTENTS WELCOME Introduction ..................... 3 Specifications ....................3 SAFETY General Safety Rules ..................4 Planer Safety Warnings ..................6 Electrical Information ..................7 Battery & Charger Safety Warnings ..............8 BEFORE OPERATING Unpacking & Packing List ................10 Know Your Planer ..................11 OPERATION &...

  • Page 3: Welcome

    INTRODUCTION Thanks for purchasing the WEN Planer. We know you are excited to put your tool to work, but first, please take a mo- ment to read through the manual. Safe operation of this tool requires that you read and understand this operator’s manual and all the labels affixed to the tool.

  • Page 4: Safety

    GENERAL SAFETY RULES WARNING! Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Safety is a combination of common sense, staying alert and knowing how your item works. The term “power tool” in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool.
  • Page 5 GENERAL SAFETY RULES WARNING! Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Safety is a combination of common sense, staying alert and knowing how your item works. The term “power tool” in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool.

  • Page 6: Planer Safety Warnings

    PLANER SAFETY WARNINGS WARNING! Do not operate the power tool until you have read and understood the following instructions and the warning labels. WORKPIECE SAFETY 7. Never pull the planer backwards over the workpiece. 1. Secure the workpiece to a stable platform using Loss of control may occur.

  • Page 7: Electrical Information

    ELECTRICAL INFORMATION (CHARGER) DOUBLE-INSULATED CHARGER The charger’s electrical system is double-insulated where two systems of insulation are provided. This eliminates the need for the usual three-wire grounded power cord. Double-insulated tools do not need to be grounded, nor should a means for grounding be added to the product. All exposed metal parts are isolated from the internal metal components with protecting insulation.

  • Page 8: Battery & Charger Safety Warnings

    Never carry the charger by its cord or yank it by the cord battery chemicals. If the battery or charger are damaged, to disconnect it from the receptacle. Keep the cord away call WEN customer service at 1-800-232-1195 for as- from heat, oil and sharp edges. Make sure the cord will sistance.
  • Page 9 BATTERY & CHARGER SAFETY WARNINGS ABOUT THE BATTERY 1. The battery pack has to be charged completely before you use the tool for the first time. 2. For optimum battery performance, avoid low discharge cycles by charging the battery pack frequently. 3.

  • Page 10: Before Operating

    UNPACKING & PACKING LIST UNPACKING Carefully remove the planer from the packaging and place it on a sturdy, flat surface. Make sure to take out all contents and accessories. Do not discard the packaging until everything is removed. Check the packing list below to make sure you have all of the parts and accessories.

  • Page 11: Know Your Planer

    TOOL PURPOSE The power to trim doors, flatten boards, and much more is in the palm of your hand with your WEN Planer. Refer to the following diagrams to become familiarized with all the parts and controls of your planer. The components will be referred to later in the manual for assembly and operation instructions.

  • Page 12: Operation & Maintenance

    OPERATION WARNING! To prevent serious injury, make sure all the instructions have been read and understood before operating this tool. Before plugging the machine into the power supply, always check that the trigger switch and trigger lock work properly. USING THE SAFETY KICKSTAND Fig.
  • Page 13 OPERATION ADJUSTING THE CUTTING DEPTH Fig. 4 The planer’s cutting depth is determined by the height difference between the adjustable front shoe and the cutting edge of the blade. The depth adjustment knob moves the front shoe to adjust how much blade is exposed, which determines the amount of material that will be removed.
  • Page 14 OPERATION WARNING! Wear safety goggles at all times that comply with ANSI Z87.1. Use ear protection such as plugs or muffs during extended periods of operation. Wear a face mask or dust mask to fight the dust. OPERATING YOUR PLANER 1.
  • Page 15 OPERATION WARNING! To avoid injury from accidental startups, always ensure that the tool is switched OFF and un- plugged from the power supply before making any adjustments to the planer. USING THE PARALLEL GUIDE FENCE Fig. 7 The parallel guide fence ensures that the planer travels parallel to the edge of the wood , providing a straight cut at your desired cutting width.

  • Page 16: Adjustments

    ADJUSTMENTS WARNING! To avoid injury from accidental startups, always ensure that the tool is switched OFF and un- plugged from the power supply before making adjustments or installing or removing blades. REMOVING OR INSTALLING PLANER BLADES WARNING! Planer blades are sharp and fragile. Wear protective gloves to protect your hands. Handle the blades carefully to avoid personal injury or damage to the blades.
  • Page 17 ADJUSTMENTS WARNING! To avoid injury from accidental startups, always ensure that the tool is switched OFF and un- plugged from the power supply before making adjustments or installing or removing blades. 7. Slide the blade with the good side up into the blade retainer of Fig.

  • Page 18: Maintenance

    To replace the drive belt, unscrew and open the belt cover on the left (Fig. 16). Install new belt (part no. 20653-034, available for purchase at wenproducts.com) and replace drive belt cover.

  • Page 19: Exploded View & Parts List

    EXPLODED VIEW & PARTS LIST NOTE: Not all parts may be available for purchase. Parts and accessories that wear down over the course of normal use are not covered under the warranty.
  • Page 20 Belt Cover Plate Depth Knob Bearing, 608-2RS Screw, ST4x16 Flat Head Screw, Knob Cover M4x8 Screw with Washer, Driving Pulley ST4x10 20653-034 Drive Belt, 4-EPJ230 Square Nut, M6 Belt Cover Ball Spring Screw, M4x10 Ball, 3.5mm Driven Pulley Housing Bearing, 6000-2RS...

  • Page 21: Warranty Statement

    WARRANTY STATEMENT WEN Products is committed to building tools that are dependable for years. Our warranties are consistent with this commitment and our dedication to quality. LIMITED WARRANTY OF WEN PRODUCTS FOR HOME USE GREAT LAKES TECHNOLOGIES, LLC (“Seller”) warrants to the original purchaser only, that all WEN consumer power tools will be free from defects in material or workmanship during personal use for a period of two (2) years used for professional or commercial use.
  • Page 22 NOTES...
  • Page 23 NOTES...
  • Page 24 THANKS FOR REMEMBERING V. 2021.03.12...

This manual is also suitable for:

20653bt

Table of Contents