Initial Setup - Kodak DCS Pro 14n User Manual

Using your Camera with a POCKETWIZARD Radio Transceiver

Initial Setup

1-2
To use the POCKETWIZARD feature you must prepare the cameras and flash
units that you will be using. All devices must be equipped with or connected
to a POCKETWIZARD Radio Transceiver.
1. Screw the POCKETWIZARD antenna into the PC Sync terminal of any
cameras (with a POCKETWIZARD Radio Transceiver) in your setup.
CAUTION
:
Do not screw the POCKETWIZARD antenna too tightly. Doing
so can damage the antenna.
2. Set the appropriate POCKETWIZARD mode in each transmitting and
receiving device (see
3. Set the channel and zones in the transmitting and receiving devices. If
a receiving device has no user interface, use the Teach Channel feature
on the camera to "teach" it the appropriate values (see
If you don't connect the antenna to your camera (or if the antenna is
damaged), the following screen appears when you capture an image
in POCKETWIZARD mode.
page 1-5).
page 1-12).
July 12, 2004