Setting The Channel - Kodak DCS Pro 14n User Manual

Using your Camera with a POCKETWIZARD Radio Transceiver

Setting the Channel

1-6
You must set the channel in your transmitting and receiving devices.
NOTE: Devices on the same channel work together.
You can set channels 1 - 32. Channels 17 - 32 let you set zones
(see page 1-7) and receive flash / triggering confirmation (see
NOTE: Flashes with POCKETWIZARD Inside do not have a user interface.
You have to set their channels using the Teach Channel function
(see page 1-12).
1. Choose Transmit or Receive, then choose Channel.
2. Press the right side of the Four-way switch to display two boxes where
you can select the channel.
3. Press the right or left side of the Four-way switch to highlight the ten's
or the one's position. Press the top or bottom of the Four-way switch to
increase or decrease the value.
4. Press the OK button.
page 1-8).
July 12, 2004