Removing The System Board - Dell Latitude D410 Service Manual

Back to Contents Page
System Board
Dell™ Latitude™ D410 Service Manual
Removing the System Board
Replacing the System Board
Removing the System Board
CAUTION:
NOTICE:
as the back panel) on the computer.
The system board's BIOS chip contains the Service Tag sequence, which is also visible on a barcode label on the bottom of the computer. The replacement kit
for the system board includes a CD that provides a utility for transferring the Service Tag to the replacement system board.
NOTICE:
NOTICE:
1. Follow the instructions in
2. Remove the
3. Remove the keyboard.
4. Remove the
5. Remove the
6. Remove the
7. Remove the fan.
8. Remove the M2.5 x 5-mm screw that secures the plastic shield to the computer base.
1 M2.5 x 5-mm screw (1)
2 plastic shield
9. Disconnect the
10. Disconnect the connector of the internal card with Bluetooth® wireless technology from the system board.
Great user manuals database on
Before you begin any of the procedures in this section, follow the safety instructions located in the Product Information Guide.
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such
Disconnect the computer and any attached devices from electrical outlets, and remove any installed batteries.
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by touching an unpainted metal surface on the computer.
"Preparing to Work Inside the
center control cover.
internal card with Bluetooth® wireless
display assembly.
palm rest.
smart card reader from the system board.
UserManuals.info
Computer."
technology.