Advertisement
Contents
Connections
o Example layout for Auro-3D 11.1 channel
system
This speaker configuration is optimized for Auro-3D playback.
FHL
SHL
FL
SW
SL
0 Set "Floor" to "5ch" and "Height Sp" to "6ch" in the menu when connecting in this
configuration. (v p. 206)
Next, set "Height" - "Front Layout" to "Front Height & Center Height" and "Middle
Layout" to "Surround Height & Top Surround". (v p. 211)
Front panel
Display
Playback
TS
FHR
CH
SHR
FR
SR
C
Rear panel
Settings
z 3
z 3
FR
FL
Power amplifier
C
SR
SL
z1 The Top Surround and Center Height Speaker can be connected to the
Surround Back terminal instead of the Surround Back Speaker.
z2 For the best Auro-3D experience Surround Height speakers are
recommended, however you may substitute Rear Height speakers from a
Dolby Atmos speaker setup in place of Surround Height speakers.
z3 You can connect the external power amplifier to the Height 2 or Top
Surround / Center height channel instead of the Front channel. Use the "Pre-
out" setting in the menu to set the channel connected to the external power
amplifier. (v p. 213)
52
Remote
Tips
Appendix
CH
TS
FHR
FHL SHR SHL
z 1
z 1
z 2
Index
SW
z 2
Advertisement
