Advertisement
Contents
Connections
Connecting 9.1-channel speakers
o Example layout when using surround back
and one set of height speakers
FHL
FL
SW
SL
SBL
For each speaker connection, refer to the following.
"Connecting speakers to the speaker terminals" (v p. 42)
0
"Connecting an external power amplifier" (v p. 43)
0
0 Set "Floor" to "5ch & SB" and "Height Sp" (or "Dolby Sp") to "2ch" in the menu
when connecting in this configuration. (v p. 206)
0 You can change the Front Height Speakers to any Height/Ceiling/Dolby Atmos
Enabled speakers in the "Amp Assign" - "Layout" setting. (v p. 208)
Front panel
Display
Playback
FHR
FR
SR
C
SBR
Rear panel
Settings
o Example layout when using two sets of height
speakers
RHL
SL
For each speaker connection, refer to the following.
"Connecting speakers to the speaker terminals" (v p. 42)
0
"Connecting an external power amplifier" (v p. 43)
0
0 Set "Floor" to "5ch" and "Height Sp" (or "Dolby Sp") to "4ch" in the menu when
connecting in this configuration. (v p. 206)
0 You can change the Front Height Speakers and Rear Height Speakers to any
Height/Ceiling/Dolby Atmos Enabled speakers in the "Amp Assign" - "Layout"
setting. (v p. 208)
49
Remote
Tips
Appendix
RHR
FHL
FHR
FL
FR
SW
SR
C
Index
Advertisement
