Advertisement
Contents
Connections
No sound is produced from subwoofer.
Check the subwoofer connections.
0
Turn on the subwoofer's power.
0
Set "Speaker Configuration" - "Subwoofer" in the menu to "1 spkr", "2 spkrs", "3 spkrs" or "4 spkrs". (v p. 214)
0
When "Speaker Configuration" - "Front" in the menu is set to "Large", depending on the input signal and the sound mode, no sound may be output from
0
the subwoofer. (v p. 214)
When no subwoofer audio signal (LFE) is included in the input signals, no sound may be output from the subwoofer. (v p. 225)
0
You can make the subwoofer always output sound by setting the "Subwoofer Output" to "LFE + Main". (v p. 225)
0
DTS sound is not output.
Check that the digital audio output setting on the connected device is set to "DTS".
0
Dolby Atmos, Dolby TrueHD, DTS-HD, Dolby Digital Plus audio is not output.
Make HDMI connections. (v p. 61)
0
Check the digital audio output setting on the connected device. On some devices, "PCM" is set by default.
0
DTS Neural:X mode cannot be selected.
DTS Neural:X cannot be selected when using the headphones.
0
Dolby Surround mode cannot be selected.
Dolby Surround cannot be selected when using the headphones.
0
IMAX DTS:X cannot be selected.
IMAX DTS:X and IMAX DTS cannot be selected but DTS:X and DTS can be selected, when the headphones are used.
0
Sound modes other than "Stereo" or "Direct" cannot be selected.
Only "Stereo" or "Direct" can be selected for the sound mode if Headphone:X signals are input.
0
Front panel
Display
Playback
Settings
262
Rear panel
Tips
Remote
Index
Appendix
Advertisement
