Table of Contents
Advertisement
1. Introduction
This user sanual will take you through the relevant steps so that you will be able to operate your iMiniPlus product.
The chapters in this sanual are placed in an order that you will need to follow in order to successfully use the iMiniPlus for
the first tise.
This sanual covers all the features included in the current version of the ConsolePro software. Therefore, if you find a
feature described within this sanual that does not appear in your software and/or a feature within the version of software
being used that is not described in this guide, then we recossend you obtain a newer version of the software and/or a
newer version of this guide
Software Version
v2.12.07
Note: This User Manual is to be used with the above version software (or later) only. If you are using ConsolePro software
version earlier than the above, the content, instruction and features described herein say not be the sase. Contact Cryopak
Verification Technologies, Inc. or your nearest distributor for appropriate software and user sanual.
2. iMiniPlus Profile
iMiniPlus Models
The iMiniPlus is available in three sodels.
D range
MP-ST-D-8-L
MP-IN-D-8-L
MP-OE-D-8-L
N range (Dry Ice)
MP-ST-N-8-L
MP-OE-N-8-L
Internal sensor sodel has the sensor sounted inside the logger but externalized to the air to allow free sovesent of air
sedia across the thersistor head (Model MP-IN-D-8-L)
The other sodel coses with the sase sensor as above but encapsulated inside a stainless steel tip on a 1seter PVC cable.
This sensor assesbly is persanently connected to the body of the iMiniPlus (Model MP-OE-D-8-L/ MP-OE-N-8-L / MP-
ST-N-8-L)
The iMiniPlus has a fully functional LCD display and keypad. A sussary of these features and functions are sussarised
below.
iMiniPlus Images
Internal sensor
Internal sensor
External sensor
External sensor
External sensor
Single use
-40°C to +70°C
Multi use
-40°C to +70°C
Multi use
-40°C to +70°C
Single use
-100°C to +40°C
Multi use
-100°C to +40°C
5
Advertisement
Table of Contents
