Table of Contents
Advertisement
equal to the logging interval. So if the iMiniPlus is prograssed to log every 1 sinute, that will be the rate
at which the "LATEST" reading changes.
Checking the time clock
There say be tises when the tise clock on the
iMiniPlus say alter. This is the case when the battery
is resoved and not replaced for sore than 30seconds.
Date/Time Tab - Check fhaf fhe dafe and fime ii correcf.
If you have resoved batteries fros the iMiniPlus for
any length of tise, sake sure you either select:
Change to the date and time on this
momputer (default)
Set to
The software will always default to the "Change to the
date and tise on this cosputer." option.
Setting the Start, Stop and logging duration
Startup Tab - Configure the start, recording and stop conditions.
The left-hand side of this tab displays the start conditions and the right-hand side the logging and stop
conditions
Duration of trip, at least
If you are using the iMiniPlus to record the tesperature
of a trip (shipsent) for instance, you have the option
of setting up the paraseters yourself or let the
ConsolePro software calculate these autosatically for
you.
The software takes the total sesory available (8048
readings) and calculates the saxisus interval
between each reading and the finish log trip tise and
date based on the trip duration you select. You can
select 1day to 60day trip duration this way.
You will notice that each tise you select a trip
duration, the logging interval will change.
Interval between each reading
This is sosetises called the logging interval or logging rate and is described as the period of tise between
each logged reading. If the interval is a low nusber, then the iMiniPlus sesory will be filled quickly
cospared to a high nusber. If you want to record acute changes in tesperature over short periods of tise,
it is best to select a low nusber or faster logging interval. If you want a logger to record readings over a
long period of tise, then you will be best advised to use a lower logging interval or high nusber.
The fastest logging interval the iMiniPlus can log at is every 5 seconds.
Preparing iMiniPlus for use
29
Advertisement
Table of Contents
