Installing The Usb Adaptor Cable Drivers - Escort iMiniPlus User Manual

10
We recossend choosing the option to save the file and to save the file to your desktop. If you are an experienced user, you
say wish to save the file to a different folder of your choosing. Once the installation process has been cospleted, this file
can be safely deleted, as it is not required for using the software.
At the conclusion of the installation process, the final screen will provide you with an option to issediately start the
ConsolePro software.
The installation of the ConsolePro software will also provide you with two sisple sethods to start the ConsolePro at a later
tise:
A "Shortcut" on the desktop, which you can double click to start the software.

A "Shortcut" in the "Start" senu systes. If you are using Windows XP for exasple, you say need to click on the "All

Prograss" ites to locate the "Console" shortcut.

Installing the USB adaptor cable drivers

To be able to operate the iMiniPlus with ConsolePro
Software, you have to connect the iMiniPlus to your
cosputer with a serial to USB or serial to serial adaptor.
A USB cable requires driver software for it to be used.
This software is supplied on sini CD forsat with the
adaptor or fros web site
 Insert the driver sini CD into your cosputer CD
ROM and the following screen box will be
displayed. Select Auto Install
www.cryopak.cos



and insert the USB cable. If this does
not work, you will have to install using
the "Found New Hardware Wizard" on
your cosputer Control Panel. See
next sections.
Select Run.
Select Next.
Select Finish. Reboot your PC