Basic Inspection - Delta DOP-A Quick Start Manual

Call 1(800)985-6929 for Sales
Power Line Installation
The specifications for power terminal wiring are shown in the table below:
Type
Solid
Stranded
The specifications for communication terminal wiring are shown in the table below (AS Series only):
Type
Solid
Stranded
Be sure to plug power line into HMI according to following arrow direction.

Basic Inspection

Item
General Inspection
Call 1(800)985-6929 for Sales
deltaacdrives.com
Wire Gauge (AWG)
28~12
28~12
Wire Gauge (AWG)
30 ~ 16
30 ~ 16
DOP-AS35THTD
DOP-AS38BSTD
DOP-AS57BSTD
Periodically inspect the screws of the connection between the HMI and device.
Tighten screws as necessary as they may loosen due to vibration and varying
temperatures.
Ensure that oil, water, metallic particles or any foreign objects do not fall inside the
HMI, control panel or ventilation slots and holes. As these will cause damage.
Ensure the correct installation and the control panel. It should be free from
airborne dust, harmful gases or liquids.
English-4
deltaacdrives.com
sales@deltaacdrives.com
Stripped length
7~8 mm
7~8 mm
Stripped length
5 ~ 6 mm
5 ~ 6 mm
DOP-A(E)57G(B)(C)STD
Content
sales@deltaacdrives.com
Torque
5 kg-cm (4.3 lb-in)
5 kg-cm (4.3 lb-in)
Torque
2 kg-cm (1.7 lb-in)
2 kg-cm (1.7 lb-in)
DOP-A80THTD1
DOP-AE80THTD
DOP-A(E)10THTD1