Stiga Cruiser 430 Li 60 Series Operator's Manual page 122

– Letting oneself be transported by the machine.
– Using the machine to tow or push loads.
– Using the cutting means on surfaces other than grass.
– Using of the machine for leaf or debris collection.
– Using the machine to trim hedges, or for
cutting vegetation other than grass.
– Use of the machine by more than one person.
IMPORTANT Improper use of the machine will
invalidate the warranty, relieve the Manufacturer from
all liabilities, and the user will consequently be liable
for all and any damage or injury to himself or others.
3.1.3 User types
This machine is intended for use by consumers,
i.e. non-professional operators.
It is intended for "DIY" use only.
IMPORTANT The machine must
be used by one operator.
3.2 SAFETY SIGNS
The machine has various symbols on it (Fig.2). They are
used to remind the operator of the behaviour to follow
to use it with the necessary attention and caution.
Meaning of symbols:
Warning. Read the instructions
before operating the machine.
Danger! Risk of thrown objects.
Keep all persons away from the
work area whilst working.
Only for lawnmowers with
combustion motors.
Only for electric lawnmowers
powered by mains supply.
Only for electric lawnmowers
powered by mains supply.
Danger! Danger of cutting yourself.
Cutting means in motion. Do not
put hands or feet near or under the
opening of the cutting means.
Be careful when using the sharp
cutting means. Do not put hands
or feet near or under the opening
of the cutting means. The cutting
means continues to turn even after
the motor has been switched off.
Remove the safety key (deactivation
device) before doing maintenance.
IMPORTANT Any damaged or illegible
decals must be replaced. Order replacement
decals from an authorised service centre.
3.3 IDENTIFICATION LABEL
The identification label holds the following data (Fig.1).
1. Sound power level.
2. CE conformity marking.
3. Year of manufacture.
4. Type of machine.
5. Serial number.
6. Name and address of Manufacturer.
7. Article code.
8. Max. motor operation speed.
9. Weight in kg.
10. Power voltage and frequency.
11. Electrical protection rating.
12. Nominal power.
Write the identification data of the machine in the specific
space on the label on the back of the cover page.
IMPORTANT Quote the information on
the product identification label whenever you
contact an authorised service workshop.
IMPORTANT The example of the Declaration of
Conformity is provided on the last pages of the manual.
3.4 MAIN COMPONENTS
The machine is composed of a series of main
components that have the following functions (Fig.1):
A. Chassis: this is the casing that houses
the rotating cutting means.
B. Motor: the driving force for the cutting
means and wheel drive (if provided).
C. Cutting means: the element
designed to cut the grass.
D. Rear discharge guard: it is a safety device
which prevents objects drawn up by the blade
from being hurled away from the machine.
E. Side discharge guard (if provided): it is a safety
device which prevents objects drawn up by the
blade from being hurled away from the machine.
F. Side discharge chute (if provided): as well as
discharging the grass cuttings onto the ground
at the side, this is also a safety element that
stops any objects drawn up by the cutting means
from being hurled away from the machine.
G. Grass catcher: as well as collecting the grass
cuttings, this is also a safety element that stops
any objects drawn up by the cutting means
from being hurled away from the machine.
H. Handle: this is the operator's work station.
It is long enough to ensure the operator
remains at a safe distance from the
rotary cutting means whilst working.
I. Battery: provides the energy for starting the
motor. Its specifications and regulations for
use are described in a specific manual.
EN - 4