Advertisement
STEP 3
You will need:
1 x 28mm Nib Screw (H4)
1 x Glue (H5)
1
Carefully turn desk base upside down.
2
Place P1 (desk top) onto a solid surface with the holes facing up
3
Insert a small amount of glue into the holes on P1
4
Line up dowels on P2 & P3 with the holes on P1 and bring together
***THE DESK BASE DOWELS WILL ONLY LINE UP WITH THE HOLES ON THE
DESK TOP (P1) ONEWAY. ENSURE THAT PARTS (P2 & P3) ARE NOT HANGING
5
Fix panels (P4) with 1 x 28mm Nib screw (H4) through TZ fitting to Panel (P1).
6
Gently hammer in Plastic glides (H7) to bottom edges of Desk
www.fantasticfurniture.com.au
4 x Plastic Glides (H7)
3
1
OVER THE EDGE OF (P1)***
28MM NIB SCREW INTO T Z FITTING
4
.
.
GLUE ALL DOWEL JOINTS
2
PAGE 7
Advertisement
