Volkswagen Grand California 2020 Service Training page 45

Satellite aerial R170
The mounting plate of the satellite aerial is screwed and glued to the roof. All cables run centrally through the
cable gland into the vehicle interior. The turntable is screwed to the mounting plate.
Parabolic
reflector 60 cm
TWIN-LNB
Turntable with
integrated control
All work on the satellite system must be carried out with the utmost care.
Observe the current service literature and the instructions in the manufacturer's operating manual!
If, in the event of malfunctions (e.g. satellite system cannot be retracted and must be folded in
manually) or during assembly work on the satellite system, it is necessary to detach the rocker from
the tapered shaft, the zero point position between the rocker and the tapered shaft will be lost and it
will have to be recalibrated!
The setting of the zero point position is described in the current service literature.
Rocker
Tapered shaft
(behind the cover)
Mounting plate
Cable gland
s599_056
45