Cisco NCS 1001 Start Manual page 9

Hide thumbs Also See for NCS 1001:

Revised: April 13, 2018,

Unpack and Verify Cisco NCS 1001

Procedure

Step 1

When you receive Cisco NCS 1001 equipment at the installation site, open the top of the box. The Cisco Systems logo is

on the side of the box.

Step 2

Remove accessories and foam inserts from the box. The box contains Cisco NCS 1001 and other items needed for installation.

Step 3

To remove the shelf, grasp the side of the shelf and lift the shelf out of the box.

Step 4

Verify that you have all items.

Step 5

Verify the following:

• Cisco NCS 1001 is not damaged.

• The cable connectors, management ports, console ports, and power connectors are not damaged.

• The SFP cages on the front panel are not damaged.

• Verify that outstanding scratch, mark, bend, discoloration or deformation has not occurred to NCS 1001.

Step 6

If there is any damage, call your Cisco sales engineer for a replacement.

Ncs1001-k9