Page 1
Assembly Diagram Model No. Component List keyboard tray wrench bracket keyboard tray small screws keyboard tray L = 1, R = 1 medium bolts support frame keyboard tray desk feet glass keyboard tray rubber suction frame cups desk leg cross bar cross bar for desk glass frame keyboard...
Page 2
Assembly Diagram Model No. D51Z29 Model No. D51L29 Model No. Step 1 Screw desk feet (G) into the bottom of desk legs (N). Step 2 Take legs (F) and screw in the medium bolts (C) into and through the legs (F) and into the upper cross bars (N).
Page 3
Assembly Diagram Model No. Step 4 Screw in keyboard support tray frame (J) between left upper cross bars (N) using medium bolts (C). Step 5 Disassemble the keyboard tray brackets (H) and the keyboard tray arm (I) by pressing down the small lever and pulling up. Step 6 Attach keyboard tray arm (I) to keyboard support tray frame (J) using small screws (B).
Page 4
Assembly Diagram Model No. Step 8 To construct the keyboard tray you need to take the keyboard tray brackets (H) and secure them to the keyboard frame (L) using small screws (B) as shown in the illustration. *Note: Ensure the open end of keyboard tray arm (I) faces front side of desk. Push down on small lever to allow keyboard bracket to slide along...
Page 5
Assembly Diagram Model No. Final Assembly...
Need help?
Do you have a question about the D31S29 and is the answer not in the manual?
Questions and answers