Page 5
Insert wooden dowel (J) into part (11,13,14), secure cam bolt (L) to part (12) with screwdriver.
Page 6
Insert part (11,14,13) to part (12), then secure cam lock (K) to part (11,14,13) with screwdriver.
Page 7
Insert part (17) to part (12) as per diagram.
Page 8
Attach part (4) to part (11,14,13) using bolt (H) with hex key (C).
Page 9
Attach plastic wedge (R) to part (17) using screw (S) with screwdriver.
Page 10
Attach part (5) to part (4) using bolt (B) with hex key (C).
Page 11
Attach part (8,9) to part (1), part (9,3) to part (2) using bolt (A,B) with hex key (C).
Page 12
Attach part (15) to part (6), part (16) to part (7).
Page 13
Attach part (15,6) to part (1,9,8), part (5,4), part 10 using bolt (B) with hex key (C).
Page 14
Attach part (15) to part (3,2,9) using bolt (B) and screw (N) with hex key (C) and screwdriver.
Page 15
Attach part (16,7) to part (9,8,5,3,10) using bolt (B) and screw (N) with hex key (C) and screwdriver.
Page 16
Attach plate (P) and corner plate (Q) to part (12,5) using screw (N) with screwdriver.
Page 17
Place sticker (M) over holes as per diagram.
Page 18
Attach bracket (E) to part (8) using bolt (A) with hex key (C).
Page 19
1. Measure height for bracket in desired location. 2. Drill hole using 6mm size bit. 3. Insert wall anchor (G) into wall at desired location. *Wall anchor included for drywall mounting. Use correct wall anchor and hardware for your wall material.
Page 20
Secure furniture to wall anchor (G) in wall using washer (D) and screw (F) with screwdriver.